Fume Hood
Fume Hoods are designed to contain an exhaust toxic, obnoxious, pungent smelling gases to protect personnel and equipment in the laboratories. The fume hood comprise with international standard on fume handling systems. A motor driven dynamically balanced blower with minimal vibration and noise level creates negative pressure and sucks contaminated air from work area and throws the same in high-up atmosphere through ducting. Fabricated out of thick Duero board clad from outside in laminated sheet and inside finished in non-corrosive, chemical resistant Epoxy paint. An up & down sliding Sash made of Teak wood mounted in thick glass sheet and workable on weights & pulleys system counter balanced is provided. A gas tap and electric power plug also provided in addition to stainless steel wash basin and suitable water tap.
A work-bench with cupboard is provided to hold the hood at suitable levee from ground:
Working Chamber Size
3' x 2' x 2' | 4' x 2'x 2' | 5' x 2 1/2' x 2 ½' |
M.S. |
|
|
S.S. |
|
|
3' x 2' x 2' | 4' x 2'x 2' | 5' x 2 1/2' x 2 ½' |
S.S. Lining on work bench
3' x 2' x 2' | 4' x 2'x 2' | 5' x 2 1/2' x 2 ½' |
PVC fume DUCT (Pert)
3' x 2' x 2' | 4' x 2'x 2' | 5' x 2 1/2' x 2 1/2' |
Chamber:
4x2x2' | 6x2x2' | 8x3x3' |
ALEPH INDUSTRIES [INDIA] PRIVATE LIMITED
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Private Limited. |